ASTM A/AM Grade B23 is grade specification for alloy steel bolts, hex bolts, heavy hex bolts, stud bolts, etc for special purpose bolting. Find Grade B23 . ASTM A/AM Grade B22 is grade specification for alloy steel bolts, hex bolts, heavy hex bolts, stud bolts, etc for special purpose bolting. Find Grade B22 . ASTM A/AM Grade B21 is grade specification for alloy steel bolts, hex bolts, heavy hex bolts, stud bolts, etc for special purpose bolting. Find Grade B21 .

Author: Kazijar Meztibei
Country: Trinidad & Tobago
Language: English (Spanish)
Genre: Automotive
Published (Last): 11 March 2009
Pages: 245
PDF File Size: 1.75 Mb
ePub File Size: 20.85 Mb
ISBN: 931-8-58142-650-8
Downloads: 31373
Price: Free* [*Free Regsitration Required]
Uploader: Kigazilkree

The minimum average of 3 specimens shall not be less than 35ft-lbf 47 J.

ASTM A540 Grade B23

The hardness of material in the quenched and tempered or quenched, temepred and stress-relieved condition shall be within the limits in hardness column of the mechanical properties table. One specimen from a set of 3 may be less than 30 ft-lbf 41 J but not less than 25 w540 34J. The hardness shall be determined on the surface of the material removal of decarburization.

The hardness of material in the annealed condition shall not be greater than HB. Combining values from the two systems may result in non-conformance with the standard. Bolting materials as used in this specification cover rolled or forged bars, rotary pierced or a50 seamless tubes, bored bars, or forged hollows from forged or rolled bar segments to be manufactured into bolts, studs, washers, and nuts. The hardness of material in the quenched and tempered or quenched, temepred and stress-relieved condition shall atsm within the limits in hardness column of the mechanical properties table.

These bolts need to undergo charpy v notch impact test as compulsory requirement. Combining values from the two systems may result in nonconformance with the specification.

B Unless otherwise specified, separate determinations may vary from the specified ranges, except that elements in any heat mush not vary both above and below the specified range. The hardness of material in the annealed condition shall not be greater than HB. The hardness of material in the annealed condition shall not be greater than HB.

  EN LA MENTE DE UN PERRO ALEXANDRA HOROWITZ PDF

Within the text, the SI units are shown in brackets.

C Phosphorus and sulfur content is 0. Active view current version of standard. Such annealed material is not intended to be used without awtm quenching and tempering. One specimen from a set of 3 may be less than 30 ft-lbf 41 J but not less than 25 ft-lbf 34J. ASTM A Grade B22 is a high tensile alloy steel bolting grade intended for special application such as nuclear power plant installations.

ASTM A540 Specification

However, if desired by the purchaser, cold finishing may be specified. Within the text, the SI units are shown in brackets.

The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, molybdenum, vanadium. Combining values from the two systems may result in nonconformance with the specification. This specification is expressed in both inch-pound units and in SI units. The hardness shall be determined on the surface of the material removal of decarburization.

Bolting material ordered in the annealed condition shall have a structure suitable for machining. Such annealed bolting material is not intended to be used without subse-quent quenching and tempering as specified in 5. The minimum average of 3 specimens shall not be less than 25ft-lbf 34 J. Bolting ordered in the liquid quenched and tempered condition shall be uniformly reheated froma temperature below the cooling transformation range to the ast, austenitizing temperature, quenched in a liquid medium under substantially uniform conditions, and then uniformly reheated for tempering.

One specimen from a set of 3 may be less than 35 ft-lbf 47 J but not less than 30 ft-lbf 41J.

Bolting ordered in the liquid quenched and tempered condition shall be uniformly reheated froma temperature below the cooling transformation range to the proper austenitizing temperature, quenched in a liquid medium under substantially uniform conditions, and then uniformly reheated for tempering.

C Phosphorus and sulfur content is 0.

Bolting materials as used in this specification cover rolled or forged bars, rotary pierced or extruded seamless tubes, bored bars, or forged hollows from forged or rolled bar aztm to be manufactured into boltsstuds, washers, and nuts.

  DVGW TRGI 2008 PDF

These bolts need to undergo charpy v notch impact test as compulsory requirement.

ASTM A/AM Grade B22 Class 1/2/3/4/5 Bolting

ASTM A S540 B23 is a high tensile alloy steel bolting grade intended for special application such as nuclear power plant installations. Historical Version s – view previous versions of standard. This specification covers regular and special-quality alloy steel bolting materials which may be used for nuclear and other special applications.

It shall be quenched in a liquid medium under substantially uniform conditions and then uniformly reheated for tempering. Secondary processes are also permitted whereby steels made from these primary processes are remelted using electroslag-remelting, or vacuum-arc re-melting preocesses.

The minimum average of 3 specimens shall not be less asmt 30ft-lbf 41 J. These supplementary requirements only apply when specified individually by the purchaser in the purchase order or contract. The hardness of material in the annealed condition shall not be greater than HB. The values stated in either inch-pound units or SI units are to be regarded separately as standard.

The minimum average of 3 specimens shall not be less astn 35ft-lbf 47 J. The minimum average of 3 specimens shall not be less than 30ft-lbf 41 J. Bolting material ordered in aatm annealed condition shall have a structure suitable for machining.

ASTM A / AM – 15 Standard Specification for Alloy-Steel Bolting for Special Applications

The hardness shall be determined on the surface of the material removal of decarburization. The primary melting may incorporate separate degassing or refining The molten steel may be vacuum-treated prior axtm or during pouring asgm the ingot. The hardness shall be determined on the surface of the material removal of decarburization. ASTM A Grade B21 is a high tensile alloy steel bolting grade intended for special application such as nuclear power plant installations.

One specimen from a set of 3 may be less than 35 ft-lbf 47 J but not less than 30 ft-lbf 41J.